Bitte Warten ... Please Wait ...

Octopus CI S2 Advanced

ArtNr.: 194040 - Octopus CI S2 pro
nicht mehr im Sortiment
ArtNr.: 194060 - Octopus CI S2 Advanced
EAN: 4260217681195
Manual
Datasheet
Drawing
Onlineshop
Features
Octopus CI S2 pro
Octopus CI S2 Advanced
16 APSK
–
yes
32 APSK
–
yes
low QPSK code rates
–
yes
VCM
–
yes, 1 stream
ACM
–
yes, 1 Stream
Short Frames (16 instead of 64KBit)
–
yes
MIS (Multi Input Streams)
1 stream
all streams*
* with third-party software
  • 2 DVB-S/S2 tuners and 2 CI slots on one PCIe card
  • Watch one channel and record another channel simultaneously
  • Live TV
  • Timeshift
  • Features
  • QPSK up to 67,5 MSym with up to 180 MBit/s per channel (required for UltraHD transponders)
    Sensitivity < 30 dBµV (20dBµV DVBS2 QPSK 1/2)
  • 2-3dB lower ground noise
  • 30% lower power consumption
  • Higher tolerance with bad RF conditions like narrow transponders, reflections, bad connectors or unterminated wiring.
  • Advanced version only
  • 16 APSK
  • 32 APSK
  • low QPSK code rates
  • VCM
  • ACM
  • Short Frames (16 statt 64KBit)
  • MIS (Multi Input Streams)
  • Unicable® SCR / Cenelec EN50494
  • Supports the connection of up to 8 tuners via a single antenna cable
    Requirement: Unicable®/ SCR / CENELEC EN50494 compliant LNB or multi switch
  • JESS© / Cenelec EN50607
  • Supports up to 32 tuners under EN50607 using a single antenna cable
  • Requirement: CENELEC EN50607 compliant LNB or multi switch
  • Common Interface (CI) with Multi Transponder Technologie (MTD)
  • 2 CI slots for independent CAMs
  • Up to 2 x 4 decrypted pay TV channels
    Only one CAM required to decrypt 4 encrypted TV channels. Watch one channel and record one or more encrypted channels simultaneously.
    Notice: This function is not supported by all CAMs and providers.
    Notice: MTD is currently only supported by Windows®
  • Data rates
  • more than 96Mbit each CAM
  • Data rates adjustable to the conditions of the CAM
  • Support of unusual data rates < 72 Mbit
  • Cascading of CAMs
  • Separate voltage supply for each CAM
  • Supports hot plug in and out of the CAMs
  • Green IT
  • No use of tantal capacitors
    No use of electrolyte capacitors
Specifications – S2-tuner
  • Satellite Features
  • Symbol rate: 1 MSym up to 67,5 MSym DVB-S2
  • LNB power:
    max. 19V, 1A pulse current, 500mA continous current
    overcurrent protection
    short-circuit protection
  • L-Band: 950 MHz to 2150 MHz
  • DVB FEC: (Auto Spectral Detection)
  • Modulation: QPSK/8PSK
  • Full DiSeqC 2.X supports USALS
  • Satellite characteristics advanced version
  • 16 APSK
  • 32 APSK
  • low QPSK code rates
  • VCM
  • ACM
  • Short Frames (16 instead of 64KBit)
  • MIS (Multi Input Streams)
  • Standard connectors
  • 2 input F-connector (IEC 60169-24)
    which would support power to LNB
  • Green IT
  • RoHS compliant
  • WEEE DE 99353762
  • Unicable® compliant:
  • SCR / Cenelec EN 50494
  • JESS® compliant:
  • Cenelec EN 50607
  • Power consumption
  • 12V / 260mA = 3,1 watts 2*DVB-S2
  • Power supply
  • 12V only ( 9-17V )
  • Supported operating systems
  • Linux (Kernel 2.6.34 and higher)
  • Microsoft Windows® XP (SP3)
  • Microsoft Windows® Vista
  • Microsoft Windows® 7 (32/64 Bit)
    (incl. Windows® Media Center)
  • Microsoft Windows® 8 (32/64 Bit)
    (incl. Windows® Media Center)
  • System requirements
  • Dual Core Intel® or AMD® CPU
  • 512 MB RAM
  • 1x PCIe slot (x1 up to x16)
  • Tested CAM modules
  • Mascom Alphacrypt Light + Easy TV
  • SMIT Irdeto/Cryptoworks
  • SRG with SMIT Viaccess
  • ORF with Technicrypt CW
  • SCM Cryptoworks
  • Dimensions
  • H 108mm, L 107mm, D 15mm
Optional
  • Alle Erweiterungskarten und CI Module werden an die 3 Erweiterungsstecker der Cine S2 angeschlossen. Damit ist für den Anschluß aller Kombinationen an das Mainboard nur der PCIe Steckplatz der Cine S2 notwendig.
  • Konfiguration:
  • 1 Cine S2 +
  • 1 DuoFlex S2 =
  • 4 DVB-S2 Tuner
  • Konfiguration:
  • 1 Cine S2 +
  • 1 DuoFlex S2 +
  • 1 DuoFlex CI – Common Interfaces =
  • 4 DVB-S2 Tuner +
    2 Common Interfaces
  • Konfiguration:
  • 1 Cine S2 +
  • 3 DuoFlex S2 =
  • 8 DVB-S2 Tuner
  • Konfiguration:
  • 1 Cine S2 +
  • 1 DuoFlex S2 +
  • 2 DuoFlex C/C2/T/T2 =
  • 4 DVB-S2 Tuner +
    4 DVB-C/C2/T/T2 Tuner
  • Konfiguration:
  • 1 Cine S2 +
  • 2 DuoFlex C/C2/T/T2 +
  • 1 DuoFlex CI – Common Interfaces
  • 2 DVB-S2 Tuner +
    4 DVB-C/C2/T/T2 Tuner +
    2 Common Interfaces