not listed anymore - ArtNr.: 194040 - Octopus CI S2 pro
not listed anymore EAN: 4260217681195 - ArtNr.: 194060 - Octopus CI S2 Advanced
DD_Octopus_CI_S2_Pro_front_
Octopus CI S2 pro Octopus CI S2 Advanced

16 APSK

-- yes

32 APSK

-- yes

low QPSK code rates

-- yes

VCM

-- yes, 1 Stream

ACM

-- yes, 1 Stream

Short Frames (16 instead of 64KBit)

-- yes

MIS (Multi Input Streams)

1 Stream alle Streams*

*with third-party software



2 DVB-S/S2 tuners and 2 CI slots on one PCIe card

  • Watch one channel and record another channel simultaneously
  • Live TV
  • Timeshift

Features

  • QPSK up to 67,5 MSym and up to 180 MBit/s per channel (required UltraHD transponders)
  • Sensitivity < 30 dBµV (20dBµV DVBS2 QPSK 1/2)
  • 2-3dB lower ground noise
  • 30% lower power consumption
  • Higher tolerance with bad RF conditions like narrow transponders, reflections, bad connectors or unterminated wiring.

Advanced version only

  • 16 APSK
  • 32 APSK
  • low QPSK code rates
  • VCM
  • ACM
  • Short Frames (16 statt 64KBit)
  • MIS (Multi Input Streams)

Unicable® SCR / Cenelec EN50494

  • Supports the connection of up to 8 tuners via a single antenna cable
  • Requirement: Unicable®/ SCR / CENELEC EN50494 compliant LNB or multi switch

JESS© / Cenelec EN50607

  • Supports up to 32 tuners under EN50607 using a single antenna cable
  • Requirement: CENELEC EN50607 compliant LNB or multi switch

Common Interface (CI) with Multi Transponder Technologie (MTD)

  • 2 CI slots for independent CAMs
  • Up to 2 x 4 decrypted pay TV channels
  • Only one CAM required to decrypt 4 encrypted TV channels. Watch one channel and record one or more encrypted channels simultaneously.
  • Notice: This function is not supported by all CAMs and providers.
  • Notice: MTD is currently only supported by Windows®

Data rates

  • more than 96Mbit each CAM
  • Data rates adjustable to the conditions of the CAM
  • Support of unusual data rates < 72 Mbit

Separate voltage supply for each CAM

Cascading of CAMs

  • Supports hot plug in and out of the CAMs

Green IT

  • No use of tantal capacitors
  • No use of electrolyte capacitors


Satellite Features

  • Symbol rate: 1 MSym up to 67,5 MSym DVB-S2
  • LNB power:
  • max. 19V, 1A pulse current, 500mA continous current
  • overcurrent protection
  • short-circuit protection
  • L-Band: 950 MHz to 2150 MHz
  • DVB FEC: (Auto Spectral Detection)
  • Modulation: QPSK/8PSK
  • Full DiSeqC 2.X supports USALS

Satellite characteristics advanced version

  • 16 APSK
  • 32 APSK
  • low QPSK code rates
  • VCM
  • ACM
  • Short Frames (16 instead of 64KBit)
  • MIS (Multi Input Streams)

Standard connectors

  • 2 input F-connector (IEC 60169-24) which would support power to LNB

Green IT

  • RoHS compliant
  • WEEE DE 99353762

Unicable® compliant:

  • SCR / Cenelec EN 50494

JESS® compliant:

  • Cenelec EN 5060

Power consumption

  • 12V / 260mA = 3,1 watts 2*DVB-S2

Power supply

  • 12V only ( 9-17V )

Supported operating systems

  • Linux (ab Kernel 2.6.34)
  • Microsoft Windows® 7 (32/64 Bit) (incl. Windows® Media Center)
  • Microsoft Windows® 8 (32/64 Bit) (incl. Windows® Media Center)

System requirements

  • Dual Core Intel® or AMD® CPU
  • 512 MB RAM
  • 1x PCIe slot (x1 up to x16)

Tested CAM modules

  • Mascom Alphacrypt Light + Easy TV
  • SMIT Irdeto/Cryptoworks
  • SRG with SMIT Viaccess
  • ORF with Technicrypt CW
  • SCM Cryptoworks

Dimensions

  • H 108mm, L 107mm, D 15mm