4x Multi-Band Tuner
- DVB-S (satellite tuner)
- DVB-S2 (satellite tuner)
- ISDB-S (satellite tuner)
- DVB-C (cable tuner)
- DVB-C2 (cable tuner)
- ISDB-C (cable tuner)
- J.83 (cable tuner)
- DVB-T (terrestrial tuner)
- DVB-T2 (terrestrial tuner)
- ISDB-T (terrestrial tuner)
- Note: Any mixed operation between satellite, cable and terrestrial is possible.
- Only one input is available for cable and terrestrial.
Streaming Engine
- 12 singlecast clients (independent of the number of connected tuners)
- Streaming of 12 complete transponders
- RTP streaming with very low latency
- UDP streaming with very low latency
- Very low jitter
- Consistent network utilisation and no peaks
- Notice: Improve the quality of the WLAN data transmission significantly
- Complete hardware filtering for all PIDs (no limitation)
- SAT>IP (Version 1.2) for 12 singlecast clients and/or max. 12 multicast streams
- Flexible configuration singlecast and/or multicast
- SPTS: A SPTS-Version is available for the 8 tuner Octopus NET at extra charge.
Client Software
- DVB> IP app for Android and iOS
- Note: Please note the information on compatibility in the respective app stores.
Embedded Network Switch
- 5 Port managed GigaBit-Switch (10/100/1000)
- Ethernet protocols IPv4 and IPv6
- Quality of Service, Audio Video data have priority
- 8192 MAC addresses
- 4 class priority for QoS according to IEEE802.1q
- IP filtering
Satellites Characteristics
- Up to 46 MSymbols DVB-S2, QPSK, 8PSK
- LNB Power: 4x max. 19 V, 1 A pulse current, 500 mA continuous current
- Overcurrent protection, short-circuit protection
- L-Band: 950 MHz to 2150 MHz
- DVB FEC: (Auto Spectral Detection)
- Modulation: QPSK/8PSK
- Full DiSeqC 2.X support
- QPSK/8PSK up to 46 MSym with up to 120 Mbit/s (for new UltraHD transponders)
- Sensitivity <30 dBµV
DVB-C Characteristics
- Frequency range: 51 – 858 MHz
- All modulations according to DVB-C specification
- Symbolrates from 0.87 to 6.9 MBaud
- Sensitivity: 47 dbµV (64QAM), 47 dbµV (256QAM)
DVB-C2 Characteristics
- Demodulation
- 16, 64, 256, 1024, 4096 QAM
- 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Code Rates
- 1/64 and 1/128 Guard Intervals
- 8 MHz and 6 MHz channel bandwidths
- Data Slices Types 1 & 2 supported
- Data Slice width up to 7.61 MHz
- Stream processor for automatic common-PLP and data-PLP combination
- FEC Header Type
- Robust mode
- High Efficiency mode
- Notch Support
- Narrowband and broadband notches
- Reception of narrow channels down to 2 MHz between broadband notches
- Time interleaving modes 4, 8 symbols and ‘best fit’
DVB-T/T2 Characteristics
- Frequency range: 49 – 861MHz, 2k & 8k OFDM
- All modulations according to DVB-T and DVB-T2 specification
- Sensitivity: -83.0 dBm at 16-QAM&3/4
- DVB-T2 specification versions: 1.1.1, 1.2.1 and 1.3.1
- DVB-T2 Base Profile
- DVB-T2 Lite (!) Profiles
ISDB-T Characteristics
- Conforms to ARIB STD-B31
- 6 MHz, 7 MHz and 8 MHz BW support
- Excellent phase noise resistance
- Excellent multipath equalization performance
- Automatic detection of mode/guard interval lengths
- EWS (Emergency Warning System) flag output
ISDB-C Characteristics
- With TSMF Support
Single Cable Solution
- One antenna cable supplies all cable/terrestrial tuners.
Unicable® SCR/Cenelec EN50494
- Supports up to 8 tuners with just one antenna cable.
- Using Unicable®/SCR/CENELEC EN50494 compliant LNB or multi switch.
JESS©/Cenelec EN50607
- Supports up to 32 tuners with just one antenna cable.
- Requirement: Unicable®/SCR/CENELEC EN50494 compliant LNB or multiswitch according to En50494.
DiSEeqC 2.0 Support
Additional Features
- Very low power consumption
- Very low stand by power consumption
- Open Source SW
Security
- Produced and developed according to european standards, DIN EN ISO 9001:2000
Green IT
- RoHS compliant
- WEEE DE 99353762
Power Consumption
- ≈ 12 Watt
Dimensions
- L 240 mm, W 136 mm, H 42 mm