Internet and cable TV via coaxial cable
4K/Ultra HD reception
Gross data rate 500 Mbit, net data rate up to 250 Mbit
Gigabit Ethernet
Low power consumption
- 1.7 W (small data volume)
- 2.5 W (large data volume)
Can be integrated into single outlets and multiple outlets
Green IT
Only suitable for DVB-C wiring
Satellite wiring is not supported
EAN: 4260217681041 - ArtNr.: 600700
PoliCoax Multi-Master Firmware
- Each in-wall socket can exchange data with every other in-wall socket.
- All connected devices can communicate with each other
Recommended use: home users; small corporate networks
Please check available switch designs.
The Poli Coax 500 is an in-wall socket which supports the simultaneous transmission of Internet and Cable TV on an existing coax cable network.
The installation of the in-wall socket is adding an internet connection to the existing use of cable TV on the same coax cable.
It contains an integrated Gbit LAN interface and a C pass-through socket. DSL / Ethernet data can be utilized via the Gbit Ethernet connection. The coaxial socket provides a broadband cable signal in the range of 108 MHz to 860 MHz.
The TV signal gets decoupled via coaxial socket, whereas network data is transmitted via the RJ45 socket. Interconnection of individual in-wall sockets is done automatically. The first in-wall socket is capable of supplying up to another 5 in-wall sockets.
Cable single socket for serial data distribution
Frequency Range
- 2 – 88 MHz
Network Standard
- IEEE 1901 and Home Plug AV
Hardware Encryption
- AES 128-bit
Quality of Service
- VLAN/TOS/Packet Classifier/Virtually perfect transmission with IPTV
Data Rate
- Gross 500 Mbps
- Net 250 Mbps
Remote Servicing
- TR-069 remote management (optionally)
Attenuation
- 108 – 470 MHz: -2 dB
- 470 – 860 MHz: -3 dB
Connections
- Coax in
- Coax out/Termination
- RJ-45 socket (Gbit)
- IEC TV socket
Power Connection for Remote Powering
- 24 V/1 A (Sufficient for 5 serial connected in-wall sockets)
Power Consumption
- Data rate 1 Mbit: 1.7 W
- Data rate 250 Mbit: 2.5 W
| Manufacturer | Productline | Colour RAL 9010*/Finish Material | For variants "50x50" is a frame necessary (No. s.u.) | Variants "55x55" are without frame compatible |
| BERKER | S.1/ B.1 | pure white mat | 1109 19 19 | Yes |
| BERKER | S.1 | pure white glossy | 1109 90 89 | Yes |
| BERKER | Modul 2 | pure white glossy | 1109 09 | No |
| BERKER | Arsys | pure white glossy | 1108 01 69 | Yes |
| BERKER | B.3 | Alu/pure white glossy | 1109 90 89 | Yes |
| BERKER | B.3 | Alu/pure white mat | 1109 19 19 | Yes |
| BERKER | B.7 Glas | Glas/pure white glossy | 1109 90 89 | Yes |
| BERKER | B.7 Glas | Glas/pure white mat | 1109 19 19 | Yes |
| BERKER | K.1 | pure white glossy | 1108 71 09 | No |
| BERKER | Q1 | pure white glossy | 1108 71 09 | No |
| BUSCH-JÄGER | Reflex SI Linear | alpine white glossy | 1746-214-101 | No |
| BUSCH-JÄGER | alpha exclusive | studiowhite (RAL 9016* glossy) | 1746/10-24G | No |
| BUSCH-JÄGER | alpha nea | studiowhite (RAL 9016* mat) | 1746/10-24 | No |
| BUSCH-JÄGER | impuls | alpine white glossy | 1746/10-74 | No |
| BUSCH-JÄGER | solo | studiowhite (RAL 9016* glossy) | 1746/10-84 | No |
| BUSCH-JÄGER | future/future linear | studiowhite (RAL 9016* glossy) | 1746/10-84 | No |
| BUSCH-JÄGER | axcent | studiowhite (RAL 9016* glossy) | 1746/10-84 | No |
| BUSCH-JÄGER | carat (Glas, Bronze, Gold) | studiowhite (RAL 9016*) | 1746/10-84 | No |
| GIRA | Flächenschalter | pure white (glossy) | 0282 112 | No |
| GIRA (System 55) | Standard | pure white (silk mat) | 0282 27 | Yes |
| GIRA (System 55) | Standard | pure white (glossy) | 0282 03 | Yes |
| GIRA (System 55) | E 2 | pure white (silk mat) | 0282 27 | Yes |
| GIRA (System 55) | E 2 | pure white (glossy) | 0282 03 | Yes |
| GIRA (System 55) | E 22 | pure white (glossy) | 0282 03 | Yes |
| GIRA (System 55) | Event | pure white (silk mat) + Opak… | 0282 27 | Yes |
| GIRA (System 55) | Event | pure white (glossy) + Opak… | 0282 03 | Yes |
| GIRA (System 55) | Esprit | pure white (silk mat)+Glas, Alu… | 0282 27 | Yes |
| GIRA (System 55) | Esprit | pure white (glossy)+Glas, Alu… | 0282 03 | Yes |
| GIRA | S-Color | pure white (hochglossy) | 0282 40 | No |
| JUNG | ST 550 | alpine white glossy | CD 590 Z WW | No |
| JUNG | CD 500/CD plus | alpine white glossy | CD 590 Z WW | No |
| JUNG | A 500/A plus | alpine white glossy | A 590 Z WW | Yes |
| JUNG | AS 500 | alpine white glossy | A 590 Z WW | Yes |
| JUNG | LS 990 | alpine white glossy | LS 961 Z WW | No |
| JUNG | LS plus | alpinwhite (Glas) | LS 961 Z WW | No |
| JUNG | A creation | alpine white glossy | A 590 Z WW | Yes |
| JUNG | LS Design | alpine white glossy | LS 961 Z WW | No |
| MERTEN (System M) | M-Smart | pure white mat | 5181 19 | Yes |
| MERTEN (System M) | M-Arc | pure white mat | 5181 19 | Yes |
| MERTEN (System M) | M-Plan | pure white mat | 5181 19 | Yes |
| MERTEN (System M) | M-Star | pure white mat | 5181 19 | Yes |
| MERTEN (System M) | M-Smart | pure white glossy | 5185 19 | Yes |
| MERTEN (System M) | M-Arc | pure white glossy | 5185 19 | Yes |
| MERTEN (System M) | M-Plan | pure white glossy | 5185 19 | Yes |
| MERTEN (System M) | M-Star | pure white glossy | 5185 19 | Yes |
| MERTEN (System Basis) | M1 | pure white glossy | 5171 19 | No |
| MERTEN (System Basis) | Atelier | pure white glossy | 5171 19 | No |
| MERTEN (System Basis) | 1-M | pure white glossy | 5185 19 | Yes |
| MERTEN (System Basis) | Atelier-M | pure white glossy | 5185 19 | Yes |
| MERTEN (System Fläche) | Artec | pure white glossy | 5160 99 | No |
| MERTEN (System Fläche) | Trancent | pure white glossy | 5160 99 | No |
| MERTEN (System Fläche) | Antik | pure white glossy | 5160 99 | No |
| MERTEN | Octocolor | pure white glossy | 5171 19 + Adapter 5170 99 | No |
| PEHA | Standard | pure white (glossy) | 80.670.02 ZV | No |
| PEHA | Dialog | pure white (glossy) | 95.670.02 ZV | No |
| PEHA | Aura | pure white (mat)/Glas | 20.670.02 ZV | No |
Note: Most light switch programs are designed in a shade of colour similar to RAL 9010, for which the switch manufacturers use different names. As well as colored or glass and aluminum frames can be combined with white rockers or sockets, that means, that controller with white covers can also be integrated into these frames. The exact use must be checked in each individual case.
The frames have different surface textures mat/glossy. For design reasons, the cover of the controller should have the same surface. (Standard is glossy. However, covers are also available in mat.)
50x50 mm: The housing covers of the 50x50 controllers have the edge dimension 50x50 mm. This means that they can be integrated into almost all light switch programs using 50x50 mm intermediate frames in accordance with DIN 49075. The 50x50 intermediate frames can be ordered from the light switch manufacturer or from the wholesale trade.
55x55: The housing cover of the 55x55 mm variant has the edge dimension 55x55 mm. Many light switch programs have an internal dimension of 55x55 mm. This means that the 55x55 mm cover plates can be integrated directly into these light switch programs without an intermediate frame. Whether the 55x55 mm cover plates fit into the respective light switch range, please check the column “Variant 55x55”.