2 x DVB-S2 (SAT-Tuner)
2 Common Interfaces
HDTV H.264 – 1080p
Features
- QPSK up to 45 MSym with up to 120 MBit/s per channel (for UltraHD-transponders)
- Sensitivity < 30 dBµV
Unicable® SCR/Cenelec EN50494
- Supports a connection of up to 8 tuners using one antenna cable.
- Required: Unicable®/SCR/CENELEC EN50494 compliant LNB or multi switch.
JESS©/Cenelec EN50607
- Supports a connection of up to 32 tuners using one antenna cable.
- Required: CENELEC EN50607 compliant LNB or multi switch.
Streaming engine
- 12 single cast clients (independent of number of connected tuners)
- Streaming of 12 complete transponders
- RTP streaming with very low latency
- UDP streaming with very low latency
- Very low jitter
- Consistent network utilisation and no peaks
- Notice: improve the quality of the WLAN data transmission significantly
- Complete hardware filtering for all PIDs (no limitation)
- SAT>IP (Version 1.2) for 12 singlecast clients and/or max. 12 multicast streams
- Flexible configuration of single cast and/or multicast
Embedded Network Switch
- 5 Port managed Gigabit-Switch (10/100/1000)
- Ethernet protocols IPv4 and IPv6
- Quality of Service, Audio Video data have priority
- 8192 MAC addresses
- 4 class priority for QoS according to IEEE802.1q
- IP filtering
Additional Features
- Very low power consumption
- Very low stand by power consumption
- Open Source SW
Satellite Characteristics
- Symbol rate: 1 MSym up to 67.5 MSym DVB-S2
- LNB Power: Max. 19 V, 1 A pulse current, 500 mA continuous current
- Overcurrent protection
- Short-circuit protection
- L-Band: 950 MHz to 2150 MHz
- DVB FEC: (Auto Spectral Detection)
- Modulation: QPSK/8PSK
- Full DiSeqC 2.X support
Security
- Produced and Developed according to European standards, DIN EN ISO 9001:2000
Green IT
- RoHS compliant
- WEEE DE 99353762
Power Consumption
- ≈ 8 Watt without LNB current
Dimensions
- L 126 mm, W 126 mm, H 52 mm